
Huge Door Hardware Auction





A proxy bid would make it more difficult for others to outbid you.
A proxy bid is the highest amount you are willing to pay for an auction item.
In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.
To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.
At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.
Your proxy bid amount is kept confidential from other bidders.
You can lower or delete a proxy bid by entering a lower amount.
Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.
You now have a proxy bid.
You can raise or lower your proxy bid at any time by entering a new amount.
If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.
You can adjust this proxy bid by using the form above.
If you want to remove your proxy bid click here.
You can enter the minimum bid of %s or a greater amount.
If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
Low | High | Increment |
---|---|---|
$0.00 | $101.00 | $5.00 |
$101.01 | $1,000.00 | $10.00 |
$1,000.01 | $5,000.00 | $50.00 |
$5,000.01 | $50,000.00 | $100.00 |
$50,000.01 | $100,000.00 | $500.00 |
$100,000.01 | $100,000,000.00 | $1,000.00 |
Low | High | Increment |
---|---|---|
$0.00 | $100,000,000.00 | $1.00 |
Extended Bidding: | i |
Item Description:
Kwikset Tustin Right Hand Single Cylinder Interior Trim Pack
- Interior Active Handleset Trim - Inside Trim & Single Cylinder Deadbolt
- Right Hand
- Box Pack
- Lifetime Mechanical & Finish Warranty
- Designer style and superior security with this Kwikset Signature Series„¢ product
- 1 3/4" Door Range
- Crossbore Size: 2 1/8" Crossbore
- No of Inners: 1
Extended Bidding: | i |
Item Description:
Kwikset Tustin Left Hand Single Cylinder Interior Trim Pack
- Interior Active Handleset Trim - Inside Trim & Single Cylinder Deadbolt
- Right Hand
- Box Pack
- Lifetime Mechanical & Finish Warranty
- Designer style and superior security with this Kwikset Signature Series„¢ product
- 1 3/4" Door Range
- Crossbore Size: 2 1/8" Crossbore
- No of Inners: 1
Extended Bidding: | i |
Item Description:
Includes the interior knob and interior deadbolt turnpiece, plus installation screws. See full specifications above. CONTENTS: Includes interior knob, interior deadbolt turnpiece, and screws.
Extended Bidding: | i |
Item Description:
Product Overview
- Door Prep: Crossbore 2-1/8" Edge Bore 1" Latch Face 1" x 2-1/4"
- Door thickness: 1-3/8"-1-3/4" doors standard. 2-1/4" optional on 200 and 400 functions only.
- Cylinder: 5-pin Bolt: 3/8" throw
Extended Bidding: | i |
Item Description:
Beautifully simple, Commonwealth’s clean, curved lines combine elegance with versatility.
Dimensions: 3-5/8" Length x 2-11/16" Projection
Kwikset is America’s #1 selling lock. This Kwikset 740CHL SMT Commonwealth keyed entry door lever set fits the standard bore hole of 2-1/8". All sets come with 2 levers, 2 rosettes, latch, key and all mounting hardware needed for a complete keyed entry leverset.
Extended Bidding: | i |
Item Description:
Brand Name | Kwikset |
---|---|
Item Weight | 0.01 ounces |
Number of Items | 1 |
Part Number | 81305-690 |
UNSPSC Code | 30171500 |
Extended Bidding: | i |
Item Description:
Kwikset 968H Signature Series Hancock Door Lock Interior Trim
Kwikset was founded in 1946 by Adolf Schoepe and Karl Rhinehart. As the industry leader, Kwikset has provided trusted security for over 60 years and has become synonymous with security, peace of mind, style and innovation. Step up to designer styles and superior security with Kwikset products.
Features:
- Elegance meets durability in the traditional Hancock. Its look, as well as its workmanship is designed to last
- Door Lock Interior Trim
- Signature Series Hancock
- Interior Inactive Handleset Trim - Inside Dummy Trim
- Lifetime Mechanical & Finish Warranty
- ANSI Grade 1
Specifications:
- 2 1/8" Crossbore
- 1 3/4" Door Range
- No Handing Required
Extended Bidding: | i |
Item Description:
The classic design of Tylo is at home in any décor. Its style lends a graceful finish to any door.
Dimensions: 1-7/8" Diameter x 2-19/32" Projection
Kwikset is America’s #1 selling lock. This Kwikset 200T Tylo passage door knob set fits the standard bore hole of 2-1/8". All sets come with 2 knobs, 2 rosettes, latch and all mounting hardware needed for a complete passage (Hall/Closet) knobset.
Extended Bidding: | i |
Item Description:
Kwikset 400T Tylo Entry Door Lock
Kwikset was founded in 1946 by Adolf Schoepe and Karl Rhinehart. As the industry leader, Kwikset has provided trusted security for over 60 years and has become synonymous with security, peace of mind, style and innovation. Step up to designer styles and superior security with Kwikset products.
Features:
- The classic design of Tylo is at home in any décor. Its style lends a graceful finish to any door
- Entry Door Locks
- Square, Round, or Drive-In Latch
- Tylo
- Round Corner Strike
- Kwikset Keyway
- Entry (Keyed) Function - Locked or unlocked by key outside or turn button inside
- Lifetime Mechanical & Finish Warranty
- ANSI Grade 3
Specifications:
- 2 3/8" or 2 3/4" Backset
- 2 1/8" Crossbore
- 6 pin cylinder
- 1 3/8" - 1 3/4" Door Range
- 2 Keys Per Lock
- 2 1/4" Full Lip Strike
- No Handing Required
Extended Bidding: | i |
Item Description:
Kwikset 400T Tylo Entry Door Lock
Kwikset was founded in 1946 by Adolf Schoepe and Karl Rhinehart. As the industry leader, Kwikset has provided trusted security for over 60 years and has become synonymous with security, peace of mind, style and innovation. Step up to designer styles and superior security with Kwikset products.
Features:
- The classic design of Tylo is at home in any décor. Its style lends a graceful finish to any door
- Entry Door Locks
- Square, Round, or Drive-In Latch
- Tylo
- Round Corner Strike
- Kwikset Keyway
- Entry (Keyed) Function - Locked or unlocked by key outside or turn button inside
- Lifetime Mechanical & Finish Warranty
- ANSI Grade 3
Specifications:
- 2 3/8" or 2 3/4" Backset
- 2 1/8" Crossbore
- 6 pin cylinder
- 1 3/8" - 1 3/4" Door Range
- 2 Keys Per Lock
- 2 1/4" Full Lip Strike
- No Handing Required
Extended Bidding: | i |
Item Description:
- Emergency Release pin hole exterior and Push lock interior
- Exposed screws
- 1-3/8-Inch to 1-3/4-Inch Door Range
- ANSI/BHMA Grade 2 Certified
- Fits standard door prep
- Field reversible non-handed
- ADA compliant
Extended Bidding: | i |
Item Description:
Dexter J10-LAS-619 Satin Nickel Passage LaSalle Style lever Certifications: ANSI A156.2, 1996, Series 4000, Grade 3 Applications: Residential locks single and multi-family entrance doors Door Ranges: 1-3/8" to 1-3/4" Backset: Universal latch standard, fits 2-3/8" or 2-3/4" backsets. Latches: 1" x 2-1/4", Radius corner faceplate, 7/8" housing, 1/2" throw Strikes: 1-5/8" x 2-1/4", Full lip, Radius corner
Extended Bidding: | i |
Item Description:
- Standard duty 1/2 dummy function Jayne lever Non handed Concealed screws Box pack Grade 3 Residential hardware
- Solid brass cylinders when keyed Screw alignment adapters for easy installation
- Decorative rosettes meets American national standards and meets builders hardware manufacturers association
Extended Bidding: | i |
Item Description:
3 brand new in box items.
Extended Bidding: | i |
Item Description:
This lever is a dummy trim for one side of the door. Used for a door pull or as matching non-turning trim.
Single Dummy Function: Utilize this single dummy lever to create a uniform look throughout your home in the areas that do not require mechanical systems. Dummy levers are surface mounted with no locking mechanism and are used primarily for the inactive door in a double door installation serving as a pull.
Left Handed: Handing is determined by standing on the outside of a room, facing the door, and noting on which side the door hinges are located. This handle is left handed, and so when standing outside of the room and facing the door the hinges will be on your left.
Product Features:
A Lifetime Mechanical and Finish Warranty gives you the peace of mind that this product will be looking good and functioning smoothly for as long as you own it. (Finish warranty does not include Oil Rubbed Bronze because it is a living finish and it is expected to patina over time)
Installation is easy, all you need is a screwdriver and a little time. The set is designed to fit standard prep doors and most installations should take just a matter of minutes.
BHMA/ANSI Grade 2 certified which indicates excellent performance across a range of residential applications. This product is built from high-quality materials to give you exceptional security.
Specifications:
- Door Thickness: 1-1/2", 1-3/4", 1-3/8", 1-5/8"
- Handing: Left
- Handle Design: Flair
- Trim Design: Plymouth
- Product Weight: 1.5 lbs
Extended Bidding: | i |
Item Description:
- Interior half only
- Requires F358 or FA358 to complete handle set
- Must be ordered right handed or left handed.
- 4" minimum center to center door prep required for this two piece model.
Extended Bidding: | i |
Item Description:
2 brand new in box items.
Extended Bidding: | i |
Item Description:
2 brand new in box items.
Extended Bidding: | i |
Item Description:
- Lower portion of handleset features an exterior lower grip and interior door lock
- Pair with an electronic keypad deadbolt on front and exterior doors
- Features a patented adjustable through bolt that moves 1-1/2" to fit pre-existing door holes
- Metal construction adds strength, security and durability
- Posts guide screws into the proper location to make installation quick
- One tool installation, installs with just a Phillips screwdriver
- Adjusts to fit all standard door preps
Extended Bidding: | i |
Item Description:
The Schlage Accent Satin Nickel Left-Handed Dummy Door Lever doesn't turn, and is commonly used as a decorative pull for doors that don't require latching. The accent handle is widely popular for its elegant wave-like design that effortlessly matches a room's style without overshadowing it, especially when wrapped in our versatile Satin Nickel finish. Plus, it's been designed and tested with strength and durability in mind, protected by a lifetime limited warranty for decades of dependable use.
- Use with 1-3/8 in. to 1-3/4 in. door thickness
- Guaranteed to fit on existing, standard pre-drilled doors
- Lever design pairs well with traditional styles like antique furniture as well as more modern transitional styles
- Finish coordinates nicely with satin nickel plumbing and lighting fixtures
- Decorative dummy trim for use on 1 side of the door
- Handing is required. To determine handing: with the door open, stand with your back against the hinge jamb. If your left hand is nearer the doorknob, the door is left-handed. If your right hand is nearer the doorknob, the door is right-handed
- Easy installation with Phillips screwdriver (sold separately)
- Universal latches slide easily into place and require no tools or manual adjustments
- Mounting hardware included
- ANSI Grade 1 (Best)
Extended Bidding: | i |
Item Description:
The Schlage Accent Satin Nickel Left-Handed Dummy Door Lever doesn't turn, and is commonly used as a decorative pull for doors that don't require latching. The accent handle is widely popular for its elegant wave-like design that effortlessly matches a room's style without overshadowing it, especially when wrapped in our versatile Satin Nickel finish. Plus, it's been designed and tested with strength and durability in mind, protected by a lifetime limited warranty for decades of dependable use.
- Use with 1-3/8 in. to 1-3/4 in. door thickness
- Guaranteed to fit on existing, standard pre-drilled doors
- Lever design pairs well with traditional styles like antique furniture as well as more modern transitional styles
- Finish coordinates nicely with satin nickel plumbing and lighting fixtures
- Decorative dummy trim for use on 1 side of the door
- Handing is required. To determine handing: with the door open, stand with your back against the hinge jamb. If your left hand is nearer the doorknob, the door is left-handed. If your right hand is nearer the doorknob, the door is right-handed
- Easy installation with Phillips screwdriver (sold separately)
- Universal latches slide easily into place and require no tools or manual adjustments
- Mounting hardware included
- ANSI Grade 1 (Best)
Extended Bidding: | i |
Item Description:
Product Identifiers
-
GTIN0043156748297
-
BRANDSchlage
-
MPNF359
-
UPC0043156748297
-
eBay Product ID (ePID)1703873919
Additional Product Features
-
Door TypeInterior
-
TypeDeadbolt
-
MaterialChrome
-
ColorChrome